TL-SG108PE PoE+ Easy Smart Switch
TP-Link TL-SG108PEOverview
The TP-Link TL-SG108PE is an 8-port Gigabit Easy Smart switch with 4 PoE+ ports. One network cable carries both data and power to IP phones, cameras and Wi-Fi access points.
Up to 30 W on each PoE port, with a 64 W total budget for ports 1–4. The other four ports connect computers, printers and the router.
Easy Smart management adds VLANs, QoS and PoE Auto Recovery, which restarts a camera or access point that stops responding.
A durable metal case with a silent, fanless design for a desk or a wall.
- 4 × PoE+
- 64 W Budget
- 8 × Gigabit
- Auto Recovery
- VLAN · QoS
- Fanless
About the TL-SG108PE PoE+ Switch
Power and data on one cable
Ports 1–4 send power over the network cable to 802.3af/at devices: IP phones, IP cameras and access points work without a power adapter or an outlet nearby. Ports 5–8 are regular Gigabit ports.
Stays online by itself
PoE Auto Recovery reboots a camera or access point that drops offline, and power management protects the switch if the devices ask for more than 64 W.
Plug and play, or manage it
Out of the box it works like a simple switch. The Easy Smart web page and utility add VLANs, QoS, IGMP snooping and port monitoring.
What the TL-SG108PE gives you
- Power and data on one cableFour PoE+ ports power IP phones, cameras and access points; no extra adapters.
- 64 W PoE budgetUp to 30 W on any PoE port, 64 W shared across the four.
- PoE Auto RecoveryRestarts a camera or access point that drops offline or stops responding.
- Overload protectionIf the total goes over 64 W, the lower-priority port is cut to protect the switch and the other devices.
- Safe for every deviceDetects what each device needs; non-PoE computers and printers are safe to connect.
- Calls and video firstQoS and VLANs keep voice and video smooth and the network organised.
- All products purchased are fully warranted through HBE Yakabit.
Technical specifications
| Model |
|
|---|---|
| Standards and Protocols |
|
| Interface |
|
| PoE Ports (RJ45) |
|
| Network Media |
|
| Fan Quantity |
|
| Power Supply |
|
| Dimensions (W × D × H) |
|
| Max. Power Consumption |
|
| Max. Heat Dissipation |
|
| Packet Buffer Memory |
|
| Jumbo Frame |
|
| Switching Capacity |
|
| Packet Forwarding Rate |
|
| MAC Address Table |
|
| Quality of Service |
|
| L2 Features |
|
| VLAN |
|
| Management |
|
| Transmission Method |
|
| Certification |
|
| System Requirements |
|
| Environment |
|
Package contents
- One (1) TL-SG108PE switch
- Power adapter
- Rubber feet
- Installation guide
Specifications from TP-Link for hardware version V5.
Customer features
What the switch does for you every day.
One cable per device
- Desk phones, cameras and Wi-Fi access points get power and internet on the same cable.
- No power adapters or outlets needed next to each device.
Set up in a minute
- Plug in the power, connect your devices, done; no settings to change.
- Ports 5–8 connect computers, printers and your router.
Cameras that stay online
- PoE Auto Recovery restarts a camera or access point that stops responding, by itself.
Quiet and tidy
- No fan, so it is completely silent.
- Compact metal case (6.2 × 4.0 in) for a desk, shelf or wall.
Tech features
The details for planning and installing PoE devices.
Power over Ethernet
- IEEE 802.3af (PoE) and 802.3at (PoE+) on ports 1–4.
- Up to 30 W per port; 64 W total budget for the four ports.
- PD detection supplies the power each device needs; non-PoE devices are safe to connect.
Power management
- When the total goes over 64 W, power to the lower-priority port is cut so the higher-priority ports keep running.
- 53.5 VDC / 1.31 A external power adapter.
PoE Auto Recovery
- Detects a powered device that has gone offline or stopped responding and power-cycles it.
Management and VLAN
- Web page and Easy Smart Configuration Utility (Windows).
- 802.1Q tag, port and MTU VLAN; up to 32 VLANs.
Traffic
- Port-based, 802.1p and DSCP QoS with 4 queues; rate limit and storm control.
- IGMP snooping V1/V2/V3, link aggregation, port mirroring, cable diagnostics, loop prevention.
- 16 Gbps switching capacity, 11.9 Mpps, store-and-forward.