TL-SG1016PE PoE+ 16-Port Switch
TP-Link TL-SG1016PEOverview
The TP-Link TL-SG1016PE is a 16-port Gigabit Easy Smart switch with 8 PoE+ ports, for an office or building with many phones, cameras and access points.
Up to 30 W on each PoE port, with a 150 W total budget for ports 1–8: enough for high-powered access points and cameras.
Easy Smart management adds VLANs, QoS, PoE management, Extend Mode and PoE Auto Recovery, which restarts a device that stops responding.
A durable metal case with a silent, fanless design and a built-in power supply, for a desk or a 19-inch rack.
- 8 × PoE+
- 150 W Budget
- 16 × Gigabit
- Auto Recovery
- Rack Mount
- Fanless
About the TL-SG1016PE PoE+ Switch
Power and data on one cable
Ports 1–8 send power over the network cable to 802.3af/at devices: access points, IP cameras and IP phones can go where there is no outlet. Ports 9–16 are regular Gigabit ports.
A big power budget
150 W shared across the eight PoE+ ports, up to 30 W on each. If the devices ask for more, the lowest-priority port is cut first (port 1 has the highest priority, port 8 the lowest).
Desk or rack, silent
Fanless metal case with a built-in power supply. Use it on a desk, or fit the included brackets for a 19-inch rack.
What the TL-SG1016PE gives you
- Eight PoE+ portsPower access points, cameras and IP phones over the network cable; no extra adapters.
- 150 W PoE budgetUp to 30 W on any PoE port, 150 W shared across the eight.
- PoE Auto RecoveryRestarts a camera or access point that drops offline or stops responding.
- Overload protectionPort priority cuts the lowest-priority port first when the budget is used up.
- Sixteen Gigabit portsRoom for computers, printers and the router as well as the PoE devices.
- Calls and video firstQoS and VLANs keep voice and video smooth and the network organised.
- All products purchased are fully warranted through HBE Yakabit.
Technical specifications
| Model |
|
|---|---|
| Standards and Protocols |
|
| Interface |
|
| PoE Ports (RJ45) |
|
| Network Media |
|
| Fan Quantity |
|
| Physical Security Lock |
|
| Dimensions (W × D × H) |
|
| Mounting |
|
| Max. Power Consumption |
|
| Max. Heat Dissipation |
|
| Packet Buffer Memory |
|
| Jumbo Frame |
|
| Switching Capacity |
|
| Packet Forwarding Rate |
|
| MAC Address Table |
|
| Quality of Service |
|
| L2 Features |
|
| VLAN |
|
| PoE |
|
| Management |
|
| Transmission Method |
|
| Certification |
|
| System Requirements |
|
| Environment |
|
Package contents
- One (1) TL-SG1016PE switch
- Power cord
- Rack-mount kit
- Rubber feet
- Installation guide
Specifications from TP-Link for the current TL-SG1016PE.
Customer features
What the switch does for you every day.
One cable per device
- Access points, cameras and desk phones get power and internet on the same cable.
- No power adapters or outlets needed next to each device.
Set up in a minute
- Plug in the power cord, connect your devices, done; no settings to change.
- Ports 9–16 connect computers, printers and your router.
Cameras that stay online
- PoE Auto Recovery restarts a camera or access point that stops responding, by itself.
Quiet and tidy
- No fan, so it is completely silent.
- On a desk or in a 19-inch rack; the brackets come in the box.
Tech features
The details for planning and installing PoE devices.
Power over Ethernet
- IEEE 802.3af (PoE) and 802.3at (PoE+) on ports 1–8.
- Up to 30 W per port; 150 W total budget for the eight ports.
- Detects each device and supplies the power it needs; non-PoE devices are safe to connect.
Port priority
- Port 1 has the highest priority and port 8 the lowest.
- When the devices need 150 W or more, the lowest-priority port is cut so the others keep running.
PoE tools
- PoE management, Extend Mode and PoE Auto Recovery.
- Auto Recovery power-cycles a device that has gone offline or stopped responding.
Management and VLAN
- Web page and Easy Smart Configuration Utility (Windows).
- 802.1Q tag, port and MTU VLAN; up to 32 VLANs.
Traffic
- Port-based, 802.1p and DSCP QoS with 4 queues; rate limit and storm control.
- IGMP snooping V1/V2/V3, link aggregation, port mirroring, cable diagnostics, loop prevention.
- 32 Gbps switching capacity, 23.8 Mpps, store-and-forward.